MMX Performance Oil Change Service Kit - Toyota GR Supra

The MMR Performance Oil Change Service Kit brings together three of our essential B58/B57 upgrades: our High Performance Stainless Steel Oil Filter, the matching Billet Oil Filter Housing, plus our Magnetic Sump Plug.

So why upgrade to these three high performance lifetime replacements?

First of all, the High Performance Stainless Steel Oil Filter gets rid of the notorious B58 oil filter disintegration problem forevermore. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s well-documented collapse failure.

As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. 

As the perfect complement to your new filter, the Billet Oil Filter Housing is a direct replacement housing that replaces the cheap plastic oil filter housing which is fragile and often cracks, leading to oil leaks. Of course, the gloss-black, solid billet of 6061 aerospace-grade aluminium a thing of beauty in the engine bay, but it's certainly not just about the looks. An integrated pressure control oil bypass is built into the MMR housing, meaning that there is no need to transfer OE plastic bypass valve from OE filter housing to MMR filter housing.

The last piece of this kit is MMR Performance’s best-selling Magnetic Sump/Oil Pan Plug. It’s one of the simplest yet most effective upgrades that you can install into your engine to increase its lifespan. ​ As an engine wears, tiny metallic particles become suspended in the oil, accelerating wear each time you drive. Our magnetic sump plugs will help to separate these ferrous particles out.

All three parts are beautifully over-engineered in customary MMR fashion to give an exquisite feel and exceptional product experience.  Fitting is straightforward and of course is best done in conjunction with your next Oil and Filter change. Just remove the factory parts, and fit the MMR direct replacement units back in place.

Of course, if you prefer, all three parts are available individually if you prefer:

MMR Billet Filter Housing : MMR17-1502

MMR Performance Lifetime Oil Filter : MMR17-1501

MMR Magnetic Sump Plug : MMR03-0503

Applicable for all B58 3.0 (Petrol/Gasoline) & B57 3.0 (Diesel) engines.

Most popular diesel models include:

1. Remove MMR Oil Filter from filter housing
   
2. Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components.
   
3. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water
   
4. Agitate/stir every few minutes until the outer surface is free of any engine debris
   
5. Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution.
   
6. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service) and refit into oil filter housing and engine.
   

If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.

Part No: MMR17-1500FK